Bunn CWT-CS Coffee Maker Manual

The Bunn CWT-CS is a commercial-grade coffee maker designed for high-volume brewing. It features a stainless steel water tank, a fast brew time, and a user-friendly interface. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning and Maintenance 8. Troubleshooting

Features at a Glance

Key components: Stainless steel water tank, brew funnel, drip tray, and user interface.

Feature	Description
Stainless Steel Water Tank	Durable and maintains temperature for optimal brewing.
Fast Brew Time	Brews a full pot in under 3 minutes.
User-Friendly Interface	Simple controls for easy operation.
Drip Tray	Removable for easy cleaning.
Automatic Shut-Off	Energy-saving feature when not in use.

Installation

Unpack and inspect contents. Place on a stable surface near a power outlet.

Connect the water supply: Ensure the water line is securely attached.
Plug into a power outlet: Use a grounded outlet for safety.
Turn on the coffee maker: Allow the water to heat up before brewing.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the coffee maker; follow the on-screen prompts.

Fill the water tank: Use fresh, cold water.
Set the brew temperature: Adjust according to your preference.
Run a cleaning cycle: Follow the instructions in the manual.

CAUTION! Ensure the coffee maker is on a stable surface during setup.

Specifications

Model: Bunn CWT-CS.
Power: 120V, 60Hz.
Brewing Capacity: Up to 12 cups.
Dimensions: 15 x 8 x 14 inches.
Weight: 10 lbs.

Controls and Settings

Access the settings via the control panel. Key controls include Brew, Cancel, and Program.

Brewing Options: Select brew strength and volume.

Brewing Coffee

Follow these steps to brew coffee:

Fill the brew funnel with coffee grounds.
Fill the water tank with cold water.
Press the Brew button to start brewing.
Wait for the brewing cycle to complete.

WARNING! Hot water and steam can cause burns; handle with care.

Cleaning and Maintenance

Regular cleaning is essential for optimal performance.

Unplug the coffee maker before cleaning.
Wipe the exterior with a damp cloth.
Clean the brew funnel and drip tray regularly.
Run a descaling solution through the machine every few months.

CAUTION! Do not immerse the coffee maker in water.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unplugged or faulty outlet	Check power connection and outlet.
Slow brewing	Clogged water line	Run a cleaning cycle with descaling solution.
Weak coffee	Incorrect coffee-to-water ratio	Adjust the amount of coffee used.
Leaking water	Loose connections	Check and tighten all connections.

Service: For further assistance, contact Bunn customer support.