Bunn Single SH Coffee Maker Manual

The Bunn Single SH Coffee Maker is designed for brewing a single cup of coffee quickly and efficiently. It features a stainless steel water tank, a unique spray head for optimal coffee extraction, and a simple interface for easy operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning and Maintenance 8. Troubleshooting

Features at a Glance

Key components: Stainless steel water tank, spray head, brew basket, drip tray, and power switch.

Feature	Description
Stainless Steel Water Tank	Holds water for quick brewing
Spray Head	Ensures even coffee extraction
Brew Basket	Holds coffee grounds during brewing
Drip Tray	Catches spills and drips
Power Switch	Turns the coffee maker on/off

Installation

Unpack and inspect contents. Place on a stable surface away from heat sources.

Connect to a power source: Ensure the outlet is grounded.
Fill the water tank: Use fresh, cold water.
Place the brew basket: Ensure it is securely in place.

WARNING! Ensure the coffee maker is unplugged during installation.

First-Time Setup

Power on the coffee maker; follow the prompts for initial setup.

Fill the water tank: Use the recommended amount of water.
Run a cleaning cycle: Brew a cycle without coffee to clean the system.
Adjust settings: Set your preferred brew strength if applicable.

CAUTION! Ensure the coffee maker is on a stable surface during use.

Specifications

Model: Bunn Single SH
Power: 120V AC, 60Hz
Water Tank Capacity: 20 cups
Brewing Time: Approximately 3 minutes per cup
Dimensions: 12 x 7 x 14 inches

Controls and Settings

Access the power switch and brew settings easily located on the front panel.

Brewing Options: Standard brew, strength adjustment.

Maintenance reminders will appear on the display when necessary.

Brewing Coffee

Follow these steps to brew coffee:

Fill the brew basket with coffee grounds.
Fill the water tank with the desired amount of water.
Press the power switch to start brewing.
Wait for the brewing cycle to complete.
Pour and enjoy your freshly brewed coffee.

WARNING! Hot water and steam can cause burns; handle with care.

Cleaning and Maintenance

Regular cleaning is essential for optimal performance.

Unplug the coffee maker before cleaning.
Wipe the exterior with a damp cloth.
Clean the brew basket and drip tray regularly.
Run a descaling solution through the system every few months.

CAUTION! Do not immerse the coffee maker in water.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unplugged or faulty outlet	Check power connection and outlet.
Slow brewing	Clogged water line	Run a descaling solution through the system.
Weak coffee	Insufficient coffee grounds	Add more coffee grounds to the brew basket.
Overflowing	Overfilled water tank	Reduce the amount of water in the tank.

Service: For further assistance, contact customer support.