Bunn Titan Single Brewer Coffee Maker Manual

The Bunn Titan Single Brewer is designed for quick and efficient brewing of coffee. It features a stainless steel water tank, a commercial-grade brewing system, and a user-friendly interface. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning and Maintenance 8. Troubleshooting

Features at a Glance

Key components: Stainless steel water tank, commercial-grade brewing system, user-friendly interface, and programmable settings.

Feature	Description
Stainless Steel Water Tank	Durable and maintains optimal brewing temperature
Commercial-Grade Brewing System	Ensures consistent brewing quality
User-Friendly Interface	Simple controls for easy operation
Programmable Settings	Allows customization of brew strength and volume
Auto Shut-Off	Enhances safety by turning off after inactivity

Installation

Unpack the coffee maker and place it on a stable surface. Ensure there is adequate space around the unit for ventilation.

Connect the coffee maker to a grounded electrical outlet.
Fill the water tank with fresh water.
Place a coffee pot under the brew head.
Turn on the coffee maker and allow it to heat up.

WARNING! Ensure the unit is unplugged during installation to avoid electric shock.

First-Time Setup

Power on the coffee maker and follow the on-screen prompts to set your preferences.

Set the desired brew strength using the control panel.
Program the brew volume according to your needs.
Run a water-only cycle to clean the system before brewing coffee.

CAUTION! Handle hot water with care to avoid burns.

Specifications

Model: Bunn Titan Single Brewer.
Power: 120V, 15A.
Brewing Capacity: Up to 12 cups per cycle.
Dimensions: 15 x 8 x 14 inches.
Weight: 10 lbs.
Material: Stainless steel and plastic components.

Controls and Settings

Access the brewing settings via the control panel. Key controls include: Power, Brew Strength, Brew Volume, and Program.

Indicator Lights: Show the status of the brewing process and readiness.

Brewing Coffee

Follow these steps to brew coffee:

Fill the coffee pot with water and pour it into the water tank.
Add coffee grounds to the filter basket.
Select your desired brew strength and volume.
Press the brew button to start the process.
Once brewing is complete, pour and enjoy your coffee.

WARNING! Hot coffee can cause burns; handle with care.

Cleaning and Maintenance

Regular cleaning is essential for optimal performance. Unplug the coffee maker before cleaning.

Remove and clean the filter basket and coffee pot.
Wipe the exterior with a damp cloth.
Run a vinegar solution through the system every few months to descale.

CAUTION! Do not immerse the coffee maker in water.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unplugged or faulty outlet	Check power connection and outlet.
Weak coffee	Incorrect coffee-to-water ratio	Adjust the amount of coffee used.
Unit leaks	Worn seals or improper assembly	Inspect seals and reassemble correctly.
Not brewing	Water tank empty	Refill the water tank and restart.

Service: For further assistance, contact Bunn customer support.